Maverick Pipe - No Bull just Pipe

EMT Fittings
Rigid Fittings
Conduit Bodies

Electrical Metal Tubing Fittings

EMT connectors are used to secure EMT conduits to electrical metallic box. EMT couplings are used to couple two EMT pipes together, or an EMT pipe and a Rigid/IMC pipe together.
UL Listed to standard 514B

Products(56)

Zinc Set Screw Connectors

Used to connect EMT to steel outlet box or other metal enclosure

Zinc Set Screw Connectors Insulated

Used to connect EMT to steel outlet box or other metal enclosure

Zinc Set Screw Couplings

Used to connect two lengths of EMT

Zinc Compression Connectors

Used to connect EMT to steel outlet box or other metal enclosure

Zinc Compression Connectors Insulated

Used to connect EMT to steel outlet box or other metal enclosure

Zinc Compression Couplings

Used to connect two lengths of EMT

Zinc Rain Tight Compression Connectors

Used to connect EMT to steel outlet box or other metal enclosure.

Zinc Rain Tight Compression Couplings

Used to connect two lengths of EMT

Steel Set Screw Connector

Used to connect EMT to steel outlet box or other metal enclosure

Steel Set Screw Connector Insulated

Used to connect EMT to steel outlet box or other metal enclosure.

Steel Set Screw Couplings

Used to connect two lengths of EMT

Steel Compression Connectors

Used to connect EMT to steel outlet box or other metal enclosure

Steel Compression Connectors Insulated

Used to connect EMT o steel outlet box or other metal enclosure

Corner Elbows

Used to connect two lengths of EMT on a 90° inside corner

Zinc Set Screw Pull Elbows EMT to EMT

Used to make a 90° connection with two runs of EMT, or to an enclosure

Zinc Set Screw Pull Elbows EMT TO BOX

Used to make a 90° connection with two runs of EMT, or to an enclosure

Combination Couplings – EMT to NM

Used to connect EMT to flexible metal conduit or NM cable

Combination Couplings – EMT to Flex

Used to connect EMT to flexible metal conduit or NM cable

Offset Connectors Set Screw

Use to connect EMT to metal outlet box or enclosure where an offset is desired

Offset Connectors Compression

Use to connect EMT to metal outlet box or enclosure where an offset is desired

90° EMT Connectors Compression

Use to connect EMT to metal outlet box or enclosure where an offset is desired

Aluminum Combination Conduit Bodies LB Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LL Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LL Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies T Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies T Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies C Type

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies C Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LB Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LB Type with Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LB Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LL Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LL Type with Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LL Type with Fiber Gasket and Die-Cast Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LR Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Steel Compression Couplings

Use to connect EMT to metal outlet box or enclosure where an offset is desired

Aluminum Set Screw Conduit Bodies LR Type With Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LR Type with Fiber Gasket and Die-Cast Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

90° EMT Connectors Set Screw

Use to connect EMT to metal outlet box or enclosure where an offset is desired

EMT to Flex Combination Couplings

Used to provide transition from EMT to flexible metal conduit

Aluminum Set Screw Conduit Bodies T Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies T Type with Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies T Type with Fiber Gasket and Die-Cast Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies C Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies C Type with Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies C Type with Fiber Gasket and Die-Cast Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Mogul Conduit Bodies LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Mogul Conduit Bodies – Canadian Style LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Mogul Conduit Bodies – Canadian Style Combination LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Service Entrance Elbows LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Service Entrance Elbows LB Type Extra Long

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Conduit Body Covers Stamped Aluminum

Stamped and die-cast aluminum covers used with aluminum conduit bodies. Used in conjunction with gaskets when assembling conduit bodies

Conduit Body Covers Die cast Aluminum

Stamped and die-cast aluminum covers used with aluminum conduit bodiesUsed in conjuction with gaskets when assembling conduit bodies

Conduit Body Covers Stamped Steel

Stamped and die-cast aluminum covers used with aluminum conduit bodiesUsed in conjuction with gaskets when assembling conduit bodies

Conduit Body Gaskets Rubber

Used with aluminum conduit bodies to seal enclosure with covers

Conduit Body Gaskets Fiber

Used with aluminum conduit bodies to seal enclosure with covers

Rigid Fittings (GRC / RMC)

Used to join two lengths of conduit and couple conduit when it cannot be turned

UL Listed to standard 514B
Really, really good stuff

Products(48)

Malleable Iron Rigid Conduit Bodies LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies LL Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies LR Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies T Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies C Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies X Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LB Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LB Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LL Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LL Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LL Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LR Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LR Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LR Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies T Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LB Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LL Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LL Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LR Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LR Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies T Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies T Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies C Type

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies C Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies C Type with Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies C Type with Fiber Gasket and Die-Cast Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Mogul Conduit Bodies LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Mogul Conduit Bodies – Canadian Style LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Mogul Conduit Bodies – Canadian Style Combination LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Service Entrance Elbows LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Service Entrance Elbows LB Type Extra Long

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Conduit Body Covers Stamped Aluminum

Stamped and die-cast aluminum covers used with aluminum conduit bodies. Used in conjunction with gaskets when assembling conduit bodies

Conduit Body Covers Die cast Aluminum

Stamped and die-cast aluminum covers used with aluminum conduit bodiesUsed in conjuction with gaskets when assembling conduit bodies

Conduit Body Covers Stamped Steel

Stamped and die-cast aluminum covers used with aluminum conduit bodiesUsed in conjuction with gaskets when assembling conduit bodies

Conduit Body Gaskets Rubber

Used with aluminum conduit bodies to seal enclosure with covers

Conduit Body Gaskets Fiber

Used with aluminum conduit bodies to seal enclosure with covers

Aluminum Combination Conduit Bodies T Type with Neoprene Gasket and Stamped Cover

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies C Type with Neoprene Gasket and Stamped Cover

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Conduit Bushings Zinc

Used to terminate threaded rigid conduit or IMC to an enclosure

Conduit Bushings Zinc Insulated

Used to terminate threaded rigid conduit or IMC to an enclosure

Conduit Bushings Malleable Iron Set Screw 105°C Insulated

Used to terminate threaded rigid conduit or IMC to an enclosure

Conduit Bushings Malleable Iron Set Screw 150°C Insulated

Used to terminate threaded rigid conduit or IMC to an enclosure

Conduit Bushings Malleable Iron

Used to terminate threaded rigid conduit or IMC to an enclosure

Conduit Bushings Malleable Iron 105°C Insulated

Used to terminate threaded rigid conduit or IMC to an enclosure

Conduit Bushings Malleable Iron 150°C Insulated

Used to terminate threaded rigid conduit or IMC to an enclosure

Grounding Bushings – Lay-in Lug Zinc Insulated

Used to terminate threaded rigid conduit or IMC to an enclosure

Grounding Bushings – Lay-in Lug Malleable Iron 105°C Insulated

Used to terminate threaded rigid conduit or IMC to an enclosure

Conduit Bodies

Used to join two lengths of conduit and couple conduit when it cannot be turned

UL Listed to standard 514B
Really, really good stuff

Products(56)

Aluminum Rigid Conduit Bodies LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LB Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LB Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LL Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LL Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LL Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LR Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LR Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies LR Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies T Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies T Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies T Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies C Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies C Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Rigid Conduit Bodies C Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies LL Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies LR Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies T Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies C Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Malleable Iron Rigid Conduit Bodies X Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LB Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LL Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LL Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LR Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies LR Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies T Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies T Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies C Type

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Combination Conduit Bodies C Type with Rubber Gasket and Stamped Cover

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LB Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LB Type with Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LB Type with Fiber Gasket and Die-Cast Cover

Used with threaded rigid conduit, IMC or EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LL Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LL Type with Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LL Type with Fiber Gasket and Die-Cast Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LR Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LR Type With Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies LR Type with Fiber Gasket and Die-Cast Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies T Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies T Type with Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies T Type with Fiber Gasket and Die-Cast Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies C Type

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies C Type with Rubber Gasket and Stamped Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Set Screw Conduit Bodies C Type with Fiber Gasket and Die-Cast Cover

Used with EMT for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Mogul Conduit Bodies LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Mogul Conduit Bodies – Canadian Style LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Aluminum Mogul Conduit Bodies – Canadian Style Combination LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Service Entrance Elbows LB Type

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Service Entrance Elbows LB Type Extra Long

Used with threaded rigid conduit or IMC for providing access to the interior of a conduit system for pulling, splicing, inspection and maintenance

Conduit Body Covers Stamped Aluminum

Stamped and die-cast aluminum covers used with aluminum conduit bodies. Used in conjunction with gaskets when assembling conduit bodies

Conduit Body Covers Die cast Aluminum

Stamped and die-cast aluminum covers used with aluminum conduit bodiesUsed in conjuction with gaskets when assembling conduit bodies

Conduit Body Covers Stamped Steel

Stamped and die-cast aluminum covers used with aluminum conduit bodiesUsed in conjuction with gaskets when assembling conduit bodies

Conduit Body Gaskets Rubber

Used with aluminum conduit bodies to seal enclosure with covers

Conduit Body Gaskets Fiber

Used with aluminum conduit bodies to seal enclosure with covers

Fittings & Accessories

Menu

Explore Products

Contact Information